Promise Technology FastTrak SX4000 Lite User Manual download pdf (Page 76)

FastTrak S150 SX4 / SX4000 / SX4000 Lite User Manual

Hardware Features

32-bit / 66MHz

PCI interface compliant to PCI Rev 2.2

PCI bus mastering DMA with hardware scatter-gather engine for maximum

performance

Supports 266MB/sec burst data transfer rate across PCI bus

PCI Plug-and-Play support

Supports ACPI S1, S3 and S4

Single 168-pin DIMM slot for cache memory. 64 MB minimum / 256 MB

maximum (ECC or non-ECC, unbuffered, PC100 or above)

Supports multiple, concurrent data requests from OS

Co-exists with built-in ATA channels or other SCSI controllers

System Requirements

One bus mastering PCI slot (PCI v. 2.2 or 2.1 compliant)

One to four Ultra ATA disk drive(s) for dedicated use in the RAID array

(SX4000)

One to four Serial ATA disk drive(s) for dedicated use in the RAID array

(S150 SX4)

Operating System Support

Microsoft Windows 2000, XP, 2003 Server

RedHat Linux 8.0, 8.1

SuSE Linux 8.1, 8.2

FreeBSD 4.x

Advanced Utilities

Built-in FastBuild BIOS utility for configuration

Auto configuration and optimization

View/Create/Delete array

Convert/Expand

array

Rebuilds data on replacement disks

FastTrak SX4000 Lite supports a 33Mhz PCI interface.

An SDRAM DIMM is required for operation but not included with the FastTrak Controller

card. The optimal amount of memory depends on your RAID application.

These features do not apply to FastTrak SX4000 Lite.

1 2 ... 71 72 73 74 75 76 77 78

No comments

Promise Technology FastTrak SX4000 Lite User Manual Page 76