Promise Technology FastTrak SX4000 Lite User Manual download pdf (Page 25)

Chapter 3: FastBuild™ Utility

Define Array

Press 2 on the Main Menu screen to display, the Define Array Menu (see

below). This screen displays any existing arrays. Users commonly create one or

two arrays with FastTrak S150 SX4 or SX4000 / SX4000 Lite.

To manually create arrays from the Define Array Menu (below), press the arrow

keys to highlight an array number you wish to define, and press Enter to select it.

The Define Array Definition Menu will next appear that allows drive assignments

to the disk array (see below).

[ Define Array Menu ]

[ Keys Available ]

Array No RAID Level Total Drv Capacity (MB) Status

Array 1 ----- ----- ----- -----

Array 2 ----- ----- ----- -----

Array 3 ----- ----- ----- -----

Array 4 ----- ---- ----- -----

Note: * --Bootable Array

[ ] Up [ ] Down [ESC] Exit [Enter] Select [Space] Change Boot Drive

Figure 7. Define Array Menu screen.

Array No.

The Array Number column displays all arrays (defined or undefined) addressable

by the FastTrak Controller.

RAID Level

This column indicates the RAID type applied to a particular array.

Total Drv

This column displays the number of drives configured for the array.

Capacity (MB)

This column shows the total capacity in MB (megabytes) for each array.

Status

This column displays the status information for each array. See page 14 for

status definitions.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 77 78

No comments

Promise Technology FastTrak SX4000 Lite User Manual Page 25