Promise Technology FastTrak SX4000 Lite User Manual download pdf (Page 19)

Chapter 3: FastBuild™ Utility

This chapter contains a Setup Task Quick Reference that is a checklist of tasks

needed to initialize your FastTrak S150 SX4 or SX4000 / SX4000 Lite system,

followed by a step-by-step instructional breakdown of each task. The second half

of this chapter is a visual and technical description reference including software

screen shots.

Setup Quick Reference

Use this reference to make sure you have completed all the tasks necessary to

get your FastTrak S150 SX4 or SX4000 / SX4000 Lite server running. See

Appendix B for more information on RAID arrays.

Setup Checklist

; Power up the system and watch for the Promise FastTrak BIOS

messages.

; When prompted, press Ctrl-F to enter the FastBuild utility.

; If you are defining more than one array and booting from one of these

arrays, go to the Define Array menu. Press the Up and Down Arrow

keys to highlight the array then press the Spacebar to make it bootable.

; Restart the system for the changes to take effect.

; Watch for the Promise FastTrak BIOS messages, ensuring that the

messages reflect the array(s) you have created.

Common Tasks

The following is a listing of steps necessary to complete each type of task

required for setting up the FastTrak S150 SX4 or SX4000 / SX4000 Lite system

through the FastBuild BIOS utility. The tasks are not intended to be a complete,

step-by-step guide to setting up the FastTrak system successfully.

Note

There are some advanced RAID array configuration options that

require the PAM utility to set up.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 77 78

No comments

Promise Technology FastTrak SX4000 Lite User Manual Page 19