Promise Technology FastTrak SX4000 Lite User Manual download pdf (Page 38)

FastTrak S150 SX4 / SX4000 / SX4000 Lite User Manual

Windows Server 2003

Install Driver During New OS Installation

1. Start the installation: Boot from the CD-ROM. Press F6 after the message

“Press F6 if you need to install third party SCSI or RAID driver” appears.

2. When the Windows Setup window is generated, press S to specify an

Additional Device(s)

3. Insert the Promise Technology driver diskette into drive A: and press Enter.

4. Choose Windows 2003 Promise FastTrak S150 SX4/SX4000 Series from

the list that appears on screen, and then press the Enter.

5. The Windows 2003 Setup screen will appear again saying “Setup will load

support for the following mass storage devices:” The list will include

Windows 2003 Promise FastTrak S150 SX4/SX4000 Series.

Note: If you need to specify any additional devices to be installed, do so at

this time. Once all devices are specified, continue to the next step.

6. From the Windows Setup screen, press the Enter. Setup will now load all

device files and then continue the Windows installation.

Note: Check the readme file, included with the downloaded driver files, for

instructions on installing the RAID Console.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 77 78

No comments

Promise Technology FastTrak SX4000 Lite User Manual Page 38