Promise Technology Ultra100 TX2 User Manual download pdf (Page 21)

Ultra100™ TX2 User Manual

Netware 3.12

NWPA Update Package Installation Instructions for NetWare 3.12

Before installing the Ultra100 TX2 NetWare driver, make sure that you have installed

the latest update for the NetWare 3 operating system.

1. From the website at http://developer.novell.com/devres/sas/certinfo.htm

download NWPA_UP.EXE from the "Download the Update Package" link.

2. Install DOS and the CD-ROM driver on the target server machine.

3. Create the directory C:\SERVER.312, then change to that directory.

4. Copy NWPA_UP.EXE to C:\SERVER.312.

5. Execute NWPA_UP.EXE in the C:\SERVER.312 directory.

6. Delete NBI.NLM and NWTAPE.CDM.

7. Execute 312PTD.EXE in the same directory.

For new NetWare 3.12 servers:

Note: If your server already has NetWare 3.12 installed, jump to step 8 of

the

next section "For Existing NetWare 3.12 Servers."

8. Change directory to the D:\NETWARE.312\ENGLISH directory on the CD-

ROM drive, if it is drive letter is D:

9. Enter install at the DOS command line. Proceed through the installation of

NetWare 3.12 as usual, until the installation program ends with the cursor at

the server console command line.

10. At the server console enter the following commands:

load C:\SERVER.312\312ptd\native\start\npapatch

load C:\SERVER.312\mmattrfx

load C:\SERVER.312\nbi31x

11. Load the “ULTRA.HAM” driver.

12. Continue installation by loading INSTALL.NLM.

13. Create AUTOEXEC.NCF, as Install prompts you.

14. Create STARTUP.NCF, add the following lines before the line "load ULTRA":

load c:\SERVER.312\312ptd\native\start\npapatch

load c:\SERVER.312\mmattrfx

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 38 39

No comments

Promise Technology Ultra100 TX2 User Manual Page 21