Promise Technology Ultra100 TX2 User Manual download pdf (Page 15)

Ultra100™ TX2 User Manual

Windows 98

Installing Drivers During Windows 98 Installation

The following details the installation of the Ultra100 TX2 drivers while installing

Windows 98 (with the Ultra100 TX2 controller card already in place). If you’re

installing the Ultra100 TX2 drivers on a system with Windows 98 already installed,

see “Installing Drivers with Existing Windows 98.”

1. After installing the Ultra100 TX2 controller card and configuring the hard

drive(s), partition and format your hard drive(s), if necessary.

2. Install Windows 98 normally.

3. After installation, go the “Start” menu and choose “Settings.”

4. From the “Settings” menu, choose “Control Panel.”

5. In the “Control Panel” window, double -click on the “System” icon.

6. In the “System” window, ch oose the “Device Manager” tab.

7. In the hierarchical display under “Other Devices” is a listing for “PCI Mass

Storage Controller.” Choose it and then press the “Properties” button.

8. Choose the “Driver” tab in the “Properties” window, choose “Update

Driver,” a nd then press “Next.”

9. Choose “Search for a better driver than the one your device is using now

(recommended),” then press “Next.”

10. Choose “Specify Location,” and then type “A: \WIN9X-ME” in the text box.

11. Insert the “Ultra100 TX2 Driver” diskette into the A: drive.

12. Press the “Next” button. A message informing you that Windows has found

“Win9x-ME Promise Ultra100 TX2™ IDE Controller” should appear.

13. Press “Next,” then “Finish,” then “Yes” when asked if you want to restart

your computer. Be sure to remove the diskette from drive A:.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 38 39

No comments

Promise Technology Ultra100 TX2 User Manual Page 15