User Manual
Ultra100™ TX2 User Manual 6 Hard Drive Installation WARNING: If you wish to use your current bootable drive with the Windows NT4 or 2000 operating s
Ultra100™ TX2 User Manual 7 Installing Drivers This section details the Ultra100 TX2 driver installation procedure when used with various operating s
Ultra100™ TX2 User Manual 8 Installing Driver in Existing Windows 2000 System WARNING: If you will be moving the boot drive containing the existing
Ultra100™ TX2 User Manual 9 Windows ME Installing Drivers During Windows ME Installation The following details the installation of the Ultra100 TX2 d
Ultra100™ TX2 User Manual 10 Installing Drivers with Existing Windows ME System The following section details the installation of Ultra100 TX2 driver
Ultra100™ TX2 User Manual 11 Windows 98 Installing Drivers During Windows 98 Installation The following details the installation of the Ultra100 TX2
Ultra100™ TX2 User Manual 12 Installing Drivers with Existing Windows 98 The following section details the installation of Ultra100 TX2 drivers on a
Ultra100™ TX2 User Manual 13 Windows NT 4.x Installing Drivers During New Windows NT 4.0 Installation 1. Start the system installation by booting fr
Ultra100™ TX2 User Manual 14 Installing Drivers with Existing Windows NT 4.0 WARNING: If you wish to use your current bootable drive with the Window
Ultra100™ TX2 User Manual 15 Windows 95 Installing Drivers During New Windows 95 Installation 1. After installing the Ultra100 TX2 controller card
Ultra100 TX2™ User Manual Copyright Copyright by Promise Technology, Inc. (“Promise”), 2001. No part of this manual may be reproduced or transmit
Ultra100™ TX2 User Manual 16 Installing Drivers with Existing Windows 95 1. After installing the Ultra100 TX2 controller card and configuring the ha
Ultra100™ TX2 User Manual 17 Netware 3.12 NWPA Update Package Installation Instructions for NetWare 3.12 Before installing the Ultra100 TX2 NetWare
Ultra100™ TX2 User Manual 18 load c:\SERVER.312\nbi31x 15. Save the file. 16. DOWN and EXIT the server. 17. Remove the NetWare CD-ROM. 18. Reboo
Ultra100™ TX2 User Manual 19 Netware 4.11 NWPA Update Package Installation Instructions for NetWare 4.11 Before installing the Ultra100 TX2 NetWare
Ultra100™ TX2 User Manual 20 12. Remove the NetWare CD-ROM. 13. DOWN and EXIT the server. 14. Reboot the server. For Existing NetWare 4.11 Server
Ultra100™ TX2 User Manual 21 Netware 5 For new NetWare 5 servers: 1. Start the Netware 5 installation as you normally would. 2. When you reach th
Ultra100™ TX2 User Manual 22 9. Choose “Yes” when asked if you want to copy this driver.
Ultra100™ TX2 User Manual 23 Linux Please visit the Technical Support area at www.promise.com for updates on Linux support.
Ultra100™ TX2 User Manual 24 Troubleshooting Problem: The following warning appears in the Ultra100 TX2 BIOS: “[WA RNING] BECAUSE OF 40-CONDUCTOR CAB
Ultra100™ TX2 User Manual 25 The “F6” key was not pressed at the appropriate time. Reboot the system, and press the “F6” key when the message “Setup
Ultra100 TX2™ User Manual Table of Contents INTRODUCTION...
Ultra100™ TX2 User Manual 26 BIOS Upgrade The following instructions detail the steps that need to be taken in order to upgrade the BIOS of your Ultr
Ultra100™ TX2 User Manual 27 NOTES
Appendix A A-1 Limited Warranty Promise Technology, Inc. warrants that for two (2) years from the time of the delivery of the product to the origina
Appendix A A-2 Promise Technology shall not be liable for the cost of procuring substitute goods, services, lost profits, unrealized savings, equip
Appendix B B-1 Contacting Promise Support Promise Technical Support provides several support options for Promise users to access information and upda
Appendix B B-2
Appendix B B-3 Pacific Rim Sales Office E-mail Support [email protected] Fax Technical Support +886 3 578 23 90 Attention: Technical Suppo
Appendix C C-1 Returning Product For Repair If you suspect a product is not working properly, or if you have any questions about your product
Appendix C C-2 the event of a replacement, the replacement unit will be under warranty for the remainder of the original warranty term from p
Appendix C C-3 Your Responsibilities You are responsible for determining whether the product is appropriate for your use and will interface w
Ultra100 TX2™ User Manual NOTES
Ultra100™ TX2 User Manual 1 Introduction The PC which you are using either already contains a Promise Technology Ultra100 TX2 controller card or you
Ultra100™ TX2 User Manual 2 General Card Description The Ultra100 TX2 is designed to support newer motherboards with a PCI bus speed of 66MHz (versu
Ultra100™ TX2 User Manual 3
Ultra100™ TX2 User Manual 4 Installing The Ultra100™ TX2 This section is designed to help you prepare the Ultra100 TX2 card for installation into you
Ultra100™ TX2 User Manual 5 Controller Card Installation Installing the Ultra100 TX2 controller card in a system is a simple process. The card fits i
Comments to this Manuals