Promise Technology SMARTSTOR NS4300N User Manual download pdf (Page 106)

SmartStor NS4300N Product Manual

Shutting Down the SmartStor

The only time you need to shut down the SmartStor is to replace the disk drive

cooling fan or the power supply. See “Appendix B: Maintenance” on page 145.

During and after the shutdown, none of your folders will be accessible from your

networked PCs.

Using PASM

To shut down the SmartStor:

1. In the Tree, click the + beside the System icon.

2. Click the Reboot / Shutdown icon.

3. Click the Shutdown option.

4. Click the OK button.

5. In the confirmation box, click the OK button.

Directly

To shut down the SmartStor, press and hold the power

button for five seconds. The system status LED turns red,

then goes dark (right).

Restarting the SmartStor

To restart the SmartStor after a shutdown, press the power

button on the front of the SmartStor chassis (right).

When the SmartStor is fully booted:

• The system status LED turns green (right)

• The buzzer beeps one time (if the buzzer is enabled)

See “Enabling and Disabling the Buzzer” on page 94.

Locating the SmartStor

If your SmartStor in is on a rack with other equipment and you need to locate it

quickly, this function will assist you.

To locate the SmartStor:

1. In the Tree, click the + beside the System icon.

2. Click the System Information icon.

3. Click the System Information tab.

4. Click the Locate button.

The SmartStor’s buzzer beeps three times and the

system status LED blinks three times (right).

Power

Button

System

Status

LED

System

Status

LED

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 165 166

No comments

Promise Technology SMARTSTOR NS4300N User Manual Page 106