Promise Technology FastTrak TX2300 User Manual download pdf (Page 33)

Chapter 3: Install Drivers

Windows XP

New Installation

The following details the installation of the FastTrak TX Series RAID Controller

drivers while installing Windows XP.

1. Start the installation:

• Floppy Install: Boot the computer with the Windows XP installation

diskettes.

• CD-ROM Install: Boot from the CD-ROM. Press F6 after the message

“Press F6 if you need to install third party SCSI or RAID driver” appears.

2. When the Windows XP Setup window is generated, press S to specify an

Additional Device(s).

3. Insert the FastTrak driver diskette into drive A: and press Enter.

4. Choose Windows Promise FastTrak TX [2200, 2300] (tm) Controller from the

list that appears on screen, and then press the Enter.

5. Press S to use the driver on the floppy disk and then press Enter to continue

with installation.

6. The Windows XP Setup screen will appear again saying “Setup will load

support for the following mass storage devices:” The list will include

“Windows Promise FastTrak TX [2200, 2300] (tm) Controller”.

NOTE: If there are any additional devices to be installed, specify them now.

When all devices are specified, continue to the next step.

7. From the Windows XP Setup screen, press the Enter. Setup will now load all

device files and then continue the Windows XP installation.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 127 128

No comments

Promise Technology FastTrak TX2300 User Manual Page 33