Promise Technology Pegasus J4 User Manual download pdf (Page 22)

Promise Technologies Pegasus J4User Manual

USing the J4 firmware Updater

e J4 includes soware used to monitor the hardware and system status, change settings and upgrade

rmware. If you have not yet installed the soware, it is recommended to do so. See “Installing the J4

FirmwareUpdater”onpage13 for instructions on how to install the monitoring soware.

Launch the soware by clicking on the Promise Utility icon in your Applications folder.

Use the Updater to troubleshoot the J4 and to monitor hardware status in the following categories:

• Voltage

• Temperature

• Cooling Unit (system fan)

• Physical Drive

A green check mark indicates normal function. A yellow check mark indicates a problem. A red check

mark indicates a critical failure.

Additional information you can nd listed in the J4 Updater are Version Information (including rmware

version), the Physical Drive List displays basic information about the installed drives, and the Enclosure

Information eld displays hardware information including internal Temperature, Voltage and Fan rpm.

In addition, there are icons at the top of the menu to view a virtual Front View and Back View of the J4.

For instructions on using the Auto Shutdown feature for power saving, see “Auto Shutdown powering

savingfeature”onpage21. For instructions on how to update system rmware, see “Updating Firmware”

onpage21.

To launch the Pegasus J4 Firmware Updater, open the Applications folder and double-click on the

Pegaus J4 FW Updater icon.

Promise Utility screen

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 30 31

No comments

Promise Technology Pegasus J4 User Manual Page 22