Promise Technology FastTrak TX4000 User Manual download pdf (Page 4)

FastTrak TX4000

Step 2: Installing the FastTrak TX4000 Card

The FastTrak TX4000 Controller card fits into any available 32-bit PCI slot (must

be PCI 2.1 or 2.2 compliant). It also fits the 32-bit portion of a 64-bit PCI slot, on

the system’s motherboard (see figure below).

1. Remove the cover of your system.

2. Remove the inside slot cover of an available 32-bit PCI slot on the

motherboard.

3. Install the FastTrak TX4000 Controller card into the open slot (see Figure 1

below). Secure the bracket to the system’s frame.

4. Attach your system case’s 2- or 4-pin LED cable to the LED connector on

the FastTrak TX4000 Controller card (see Figures 2 and 3, below). Make

sure that pin 1 on the connector is aligned with pin 1 of the cable.

5. Fasten the controller card bracket to the system case (see below).

Figure 1.

Insert the FastTrak TX4000 card into an open PCI slot.

1 2 3 4 5 6 7 8 9 ... 21 22

No comments

Promise Technology FastTrak TX4000 User Manual Page 4